Flooring Calculator

Measure up room by room and get the area, what to order and the price of the flooring and underlay for each room.

Job Optional, for the printout

Who the estimate is from and who it's for. Everything is saved in this browser, and your business details are kept for the next job.

Your Business

The Customer

Printed on the estimate, e.g. what's included or what the customer needs to do before the fit

Printed as a "valid until" date. Leave blank to leave it off.

Billing a VAT-registered contractor? The reverse charge may apply, but not to carpet fitting.

Default Flooring

Every room uses this flooring and underlay unless you untick "Use the Default Flooring" in the room. Change it here and every room using it updates.

Added to every room's area to cover cuts, pattern matching and offcuts. 10% suits most rooms; allow more for awkward shapes or diagonal laying.

Rooms

No rooms added yet

Click "Add Room" to start measuring up

Estimate

Add a room to see the estimate.

Disclaimer: These are estimates only, worked out from the measurements, wastage allowance and prices you enter. Each room's area is its length times its width, so alcoves, bays, hearths, fitted units and doorways are only counted if you measure them in. Quantities include your wastage allowance but not a cut plan: carpet and sheet vinyl come off a roll, carpet usually 4 m or 5 m wide and sheet vinyl 2 m, 3 m or 4 m, so the amount you need to order can be more than shown. Check every measurement on site and confirm quantities and prices with your supplier before ordering or quoting. ProWorks gives no warranty as to accuracy or fitness for purpose and accepts no liability for any loss arising from use of these results.

Measuring Up

A few habits that keep the estimate close to what you end up ordering.

Measure the Widest Points

Take the length and width at the widest points of the room, into door reveals and bay windows. Split an L-shaped room into two rooms and add each one.

Allow for Wastage

5-10% covers most square rooms in plank or tile. Herringbone, diagonal laying and patterned carpet often need 15% or more.

Underlay or Base Layer

Carpet goes on underlay, and laminate and wood usually need a foam or fibreboard base layer. Click LVT needs a thin, firm LVT underlay, or none if it has one built in. Tick the box in each room that needs one and enter its price.

In ProWorks, the job is quoted from your saved rates, and the materials and hours are tracked against the price as the work goes on.

Turn Measure-Ups into Quotes with ProWorks